1～14 item / All 14 items
A black dye for application that reacts in 30 seconds. It can also blacken special steel that has been heat-treated up to HRC60 (using concentrated solution).
"Easy Black" is a touch-up black dye for steel. It is a cold black dye for steel used for applying to parts of assembled machinery when blackening them, or for blackening areas that have been processed on already blackened parts.
Improving and stabilizing the quality of black dyeing! A revolutionary black dye that can dye both "steel" and "castings" black! It comprehensively improves issues such as color unevenness and early rust formation.
"Heating Black Dye Ultra Black Super" is a revolutionary black dye for steel and cast iron that finishes both steel and cast iron, including reddish castings and special steels with poor color adherence, in deep black. Various special steels can also be finished in deep black by slightly increasing the boiling temperature. It is a low-irritation odor type that suppresses the generation of irritating mist, significantly improving the working environment. Additionally, we offer a "semi-automatic black dyeing machine" that allows for easy in-house black dyeing! *If you send us sample parts, we will return them after the black dyeing process! ■ Do you want to improve and stabilize black dye quality? Early red rust, color unevenness, bubbles, etc. Audeck will propose solutions. Please feel free to consult or inquire. 【Features】 ■ Black dyeing of steel, reddish cast iron, and special steels such as superalloys is possible under the same liquid and temperature conditions. ■ Reduces the fading of cast iron and superalloys over time, maintaining the black coating for a longer period. ■ The treatment solution can be reused repeatedly by topping it up. ■ Rinse water can be neutralized and discharged. ■ The generation of irritating mist is minimal, significantly reducing the impact on the human body. *For more details, please refer to the PDF document or feel free to contact us.
Resolve the coating defects issue of steel materials subjected to atmosphere heat treatment and salt bath treatment.
Steel materials that have undergone atmosphere heat treatment or salt bath treatment experience abnormal coating growth and coating defects during normal blackening processes due to changes in the crystal structure of the surface layer of the steel. "Neoferromite Plus" addresses the blackening processing of these difficult-to-blacken steels as well as all types of steel materials. ■ We want to improve and stabilize blackening quality ■ Early red rust, color unevenness, bubbles, etc. Audeck will propose solutions. Please feel free to consult or contact us. *For more details, please refer to the PDF materials or feel free to contact us.
A room temperature black dye that is used diluted with tap water! It is an environmentally friendly product.
The cold black dye for iron, steel, and cast iron, Tobika "Blackie," allows for easy black dyeing at room temperature anywhere and by anyone. (This product is a concentrated liquid, so it should be diluted with tap water before use.)
Room temperature black dye (coloring) agent, matte type
● This is a coating-type black dye, so it can be used to blacken (color) all types of metals, including iron, stainless steel, aluminum, and copper. ● It is excellent in water resistance, oil resistance, and heat resistance, and it does not peel even when the coated copper plate is heated to red heat. ● It is primarily composed of ultra-fine graphite, resulting in a matte black finish with a film thickness of 2-3μ. *For more details, please refer to the catalog or feel free to contact us.*
Heat-resistant black dye (coloring agent) specialized for greater adhesion and heat resistance, matte type.
● This is a coating-type black dye, so it can be used to blacken (color) various metals such as iron, stainless steel, aluminum, and copper. ● It forms a coating that is excellent in water and heat resistance. After heat curing, it exhibits outstanding oil and solvent resistance. (It does not peel off even when stainless steel plates are heated to red heat.) ● It is primarily composed of ultra-fine graphite, resulting in a matte black finish with a film thickness of 2-3μ. ● It maintains stable adhesion even at high temperatures above 400°C. *For more details, please refer to the catalog or feel free to contact us.*
A room temperature black dye that is used diluted with tap water! It is an environmentally friendly product.
The cold black dye for iron, steel, and cast iron, Tobika "Blackey," allows for easy black dyeing at room temperature, anywhere and by anyone. (This product is a concentrated liquid, so it should be diluted with tap water for use.) 【Features】 ○ The processing technique is extremely simple and does not require special equipment; a small amount can be done with a plastic bucket. ○ Even items with complex shapes can achieve a uniform coating. ○ Since the processing temperature is room temperature, it does not damage the material. ○ Blackey is odorless, non-flammable, and does not deteriorate even with long-term storage. ○ There is almost no change in dimensions before and after processing. ○ In addition to immersion, application methods include brush painting and spraying. *For more details, please contact us or download the PDF.
The processing technology is extremely simple and does not require special equipment; a small amount can be handled with a plastic bucket.
The black dyeing process for nickel metal can be easily done at room temperature by anyone, anywhere. (This product is a concentrated solution, so it should be diluted with tap water before use.) 【Target Metals】 It can be widely used for black dyeing of finished products and parts made of nickel metal. - Pressed parts, pins, screws, bolts, nuts, washers, springs, shafts. - Finished products or cast parts of machines, tools, and molds. - Black dyeing or repair of parts of assembled machines. 【Characteristics】 - It allows for black dyeing at room temperature through immersion. No special equipment is required. - The processing technique is extremely simple and does not require special equipment; a plastic bucket is sufficient for small quantities. - Even complex shapes of the items being treated can achieve a uniform coating. - Since the processing temperature is at room temperature, it does not damage the material. - The black dye is odorless, non-flammable, and does not deteriorate over long-term storage. - There is almost no change in dimensions before and after processing. - It is an acid aqueous solution that blackens nickel metal and colors it purple at room temperature. - It is safe and economical to use, dissolving in water without danger during work and can be diluted for use.
The black dyeing process for stainless steel can be easily done at room temperature by anyone, anywhere. (This agent is used in a two-component system.)
【Target Metals】 It can be widely used for blackening stainless steel finished products and parts. - Pressed parts, pins, screws, bolts, nuts, washers, springs, shafts. - Finished products or cast parts of machines, tools, and molds. - Blackening or repair of parts of assembled machines. 【Characteristics】 Surface activation with Solution A, blackening treatment with Solution B. Blackening can be done at room temperature by immersion. No special equipment is required. - The processing technique is extremely simple and does not require special equipment; a plastic bucket is sufficient for small quantities. - Even for items with complex shapes, a uniform film can be achieved. - Since the processing temperature is at room temperature, it does not damage the material. - The blackening solution is odorless, non-flammable, and does not deteriorate even with long-term storage. - There is almost no change in dimensions before and after processing. 【Dilution Ratios】 - Solution A is used as is. - Solution B is diluted with water to 2 to 4 times the original concentration.
Since sludge (residue) does not occur, even complex shapes can be easily blackened at room temperature by immersion or brush application. No equipment is required.
Black dyeing processing requires complete degreasing due to chemical reactions. (Note: Insufficient degreasing can cause dye unevenness.) For degreasing agents, there is trichloroethylene or a specialized degreasing agent, the water-based degreasing cleaner Tobikamaritt from Tobi Co., Ltd. In the case of trichloroethylene degreasing agent, immerse the item to be dyed for 1 to 2 minutes, ensuring sufficient degreasing, then remove it and let it air dry. Alternatively, wipe off the solvent with a cloth or towel that has not been contaminated with oil.
Concentrated type usable for both immersion and coating. For steel and cast iron up to HRC50. For blackening machine parts, repairs, and blackening of tools and jigs (used diluted 5 to 8 times).
The chemical reaction at room temperature finishes steel components in the same black color as alkaline heating blackening. High Black has a fast reaction speed, allowing for not only immersion but also blackening finishes and repairs of assembled machine parts, as well as blackening large steel products that cannot fit into a tank through application or spraying.
Black dyeing can be easily done at room temperature by anyone, anywhere. (This product is a concentrated solution, so it should be diluted with tap water before use.)
Black dyeing can be easily done at room temperature by anyone, anywhere. (This product is a concentrated solution and should be diluted with tap water before use.) 【Target Metals】 It can be widely used for black dyeing of finished products and parts made of copper, brass, and zinc. - Pressed parts, pins, screws, bolts, nuts, washers, springs, shafts. - Finished products or cast parts of machines, tools, and molds. - Black dyeing or repair of parts of assembled machines. - Black dyeing of large copper, brass, and zinc products that cannot fit into a tank. 【Characteristics】 Black dyeing can be done at room temperature by immersion or brush application. No special equipment is required. - The processing technique is extremely simple and does not require special equipment; a plastic bucket is sufficient for small quantities. - Even complex shapes of the items being treated can achieve a uniform coating. - Since the processing temperature is at room temperature, it does not damage the material. - Blackie C is odorless, non-flammable, and does not deteriorate even with long-term storage. - There is almost no change in dimensions before and after processing. - In addition to immersion, brush application and spraying methods are also available for processing.
The black dyeing process of Suzuki Metal can be easily done anywhere by anyone at room temperature. (Since this product is a concentrated solution, it should be diluted with tap water before use.)
1. **Degreasing** Black dyeing processing requires complete degreasing due to chemical reactions. (Note: Insufficient degreasing can cause dye unevenness.) For degreasing agents, there is trichloroethylene or a dedicated degreasing agent, the water-based degreasing cleaner Tobikamaritt made by Tobi Corporation. In the case of trichloroethylene degreasing agent, immerse the item to be dyed for 1-2 minutes, ensure sufficient degreasing, then remove and let it air dry. ↓ 2. **Surface Activation** If there is rust or smut, immerse in a 10% hydrochloric acid solution (a solution diluted 2-3 times with water from industrial hydrochloric acid) for 1-2 minutes. ↓ 3. **Black Dye Treatment** Dilute the room temperature black dye Tobik Blackie SN with water (distilled water or tap water) at a ratio of 1:1-2, then place the pre-treated item into this solution, stirring up and down several times, and immerse for 1-2 minutes. (Note: If used undiluted or if the dilution ratio is insufficient, it will result in poor fixation, so be careful.) ↓ 4. **Washing (Hot Washing)** Since black "sludge" adheres to the surface, please wipe it with a sponge or cloth. Additionally, using Chemik's ChemQ Sludge Remover Spray will be even more effective.
The black dyeing process for aluminum can be easily done at room temperature by anyone, anywhere. This product has different usage methods for the two components, so please check the instructions for use.
Aluminum Room Temperature Black Dye Tobika Blackie A New Type (Concentrate) 【Target Metals】 Widely used for black dyeing of aluminum finished products and parts. - Pressed parts, pins, screws, bolts, nuts, washers, springs, shafts. - Finished products or cast parts of machines, tools, and molds. - Black dyeing or repair of parts of assembled machines. 【Characteristics】 Activated with Solution A and treated with Solution B for black dyeing. Can be done at room temperature by immersion. No special equipment required. - The processing technique is extremely simple and does not require special equipment; a plastic bucket is sufficient for small quantities. - A uniform coating can be achieved even on complex shapes. - Since the processing temperature is room temperature, it does not damage the material. - Blackie is odorless, non-flammable, and does not deteriorate over long-term storage. - There is almost no dimensional change before and after processing.
